Drillling &Milling Machine W16V W16VA VARIO W16VAL VARIO
Feathers:
Gear head and square colum
Precision ground worktable
Tilting and swiveling head
With Mirco-feed hand wheel and lever down feed
Adjustble gibs on table
Adjustable stops on table
Accurate position ,strong rigidity,strong cutting power
Gear drive ,lower noise
W16V Vario Standard Accessories:
· Depth ruler
· Arbor MT2/B16,M10
· Drawar MT2/M10
· Operating tools
W16VA Vario Standard Accessories:
· Depth ruler
· Arbor MT2/B16,M10
· Drawar MT2/M10
· Operating tools
· spindle micro feed device
Optional Accessories:
· keyless drill chuck3-16mm
· ER25/6PCS collet chuck (4-16mm)
· End mill 7pcs (4-16mm)
· 58pcs of clamping kits/M10X11.7mm
· Drill chuck 3-16mm
· Stand&chip tray
· Digital Readout
· X-axis power feed
| Specification | W16V Vario | W16VA Vario | W16VAL Vario |
| Drilling capacity | Φ16mm | Φ20mm | Φ16mm |
| Max. face milling capacity | Φ50mm | Φ50mm | Φ50mm |
| Max. end milling capacity | Φ16mm | Φ20mm | Φ25mm |
| Max.distance spindle to table | 220mm | 220mm | 220mm |
| Working table size | 400×120mm | 400×120mm | 500×145mm |
| Spindle rotary angle | ±45° | ±45° | ±45° |
| Spindle taper | MT2 | MT2 | MT2 |
| Spindle speed | 50-2250rpm | 50-2250rpm | 50-2250rpm |
| X-axis travel | 220mm | 220mm | 220mm |
| Y-axis travel | 160mm | 160mm | 160mm |
| Y-axis travel | 210mm | 210mm | 210mm |
| T-Slot | 10mm | 10mm | 10mm |
| Motor power | 600w | 850w | 1000w |
| N.W/G.W | 70/90kgs | 70/90kgs | 78/100kgs |
| Packing size | 520×450×760mm | 520×450×760mm | 670x550x760mm |
评价
目前还没有评价